19 Mar 2017

The Many Processes of Plastic Part Manufacturing

When it comes to plastic part manufacturing, injection molding is among the least expensive processes available. Due to the initial investment of the mold, return on investment should be an important consideration when making the decision on what type of part manufacturing process to use. Part Manufacturing Considerations Part manufacturing volume is a major consideration. […]

READ MORE
26 Feb 2016

Product Development Makes Ski Accessory Happen For Customer

“Rex Plastics was very helpful in the product development process. They helped me with part design, material selection and made many improvements to the sample product I originally brought them. In fact, the design changes their engineer suggested literally cut the injection mold cost in half.” says Tom Arnold, owner of Powder Cord Pouch.

READ MORE
10 Aug 2016

Fundamentals of Plastic Part Design Part 6 – Ejection and Surface Finish

Rex Plastics Product Development Plastic Part Design Fundamentals Ejection and Surface Finish   Ejection When it comes to successful plastic part design, ejection and surface finish considerations are critical factors to consider.  The most common way to remove a part from the mold is through ejector pins. They apply a force to eject a part […]

READ MORE
06 Dec 2018

Helping Startups Begin

We all start somewhere. Even a business like Rex Plastics, rapidly closing in on our fiftieth anniversary, had humble beginnings. What makes us different? We understand the challenges faced by startups because for all our successes, we’ve never forgotten where we came from. That’s just one reason why we’ve been able to help so many […]

READ MORE
18 Jan 2017

Four Things to Consider Before Jumping Into Plastic Injection Molded Part Manufacturing

There are many ways to produce plastic parts and if your anticipated sales volume is high enough, plastic injection molded part manufacturing can be the most cost effective way to get the job done. If you’re ready to pull the trigger on your project, consider Rex Plastics.  Learn more about our plastic injection molded part […]

READ MORE
20 Jul 2016

Fundamentals of Plastic Part Design Part 5 – Gates and Parting Lines

Rex Plastics Product Development Plastic Part Design Fundamentals Gates and Parting Lines   Gates Each plastic part design must have a ‘gate’, or an opening that allows the molten plastic to be injected into the cavity of the mold. There are several styles of gates that are commonly used in molding. Care and consideration should […]

READ MORE
15 Jul 2013

What Every Product Developer Should Know About Custom Injection Molding

Custom injection molding is among the least expensive processes available for producing large quantities of parts. Due to the initial investment of the mold however, there is a return on investment that needs to be considered when making the decision on what type of process to use. If you anticipate needing tens or perhaps even […]

READ MORE